Timings

WIP

List of Timings

Notes:

"t" stands for tick. For example, "1t" is a 1 tick, or hh timing.

The description will assume default controls.

It is assumed these timings are performed with sprint. For example, "jam" indicates a jam with sprint while "no-sprint jam" obviously indicates a jam with no sprint.


Name (Alternate Names)	Description	Notes
0t (jam)	Press and hold W and Jump on the same tick.
1t (hh)	Press and hold W, press Jump one tick later.
2t	Press and hold W, press Jump two ticks later.
nt	Press and hold W, press Jump n ticks later.
Jump 1t (jump hh, a7hh)	Hold Jump, press and hold W a tick before landing. OR Tap Jump, press and hold W a tick before landing, press Jump upon landing.	With no ceiling, W is pressed 11 ticks after jumping. If the amount of ticks in the air is less, then W must be pressed earlier. For example, with a 3bc, W should be pressed 10 ticks after jumping. Moreover, if the airtime is 9 or fewer ticks, space must be tapped to properly execute an a7hh timing.
Jump 0t (jump jam)	Hold Jump, press and hold W 0-1 ticks before landing. OR Tap Jump, press and hold W 0-1 ticks before landing, press Jump upon landing.	Due to how ticks work, any of the above timings are partially luck based. Since a7hh and jam behave similarly, jump jam is used as a 100% strategy frequently utilized in l/d situations.
-1t (reverse hh, fast pessi hh)	Press Jump, press and hold W a tick later.
-2t (slow pessi hh)	Press Jump, press and hold W two ticks later.
-nt	Press Jump, press and hold W n ticks later.	Sometimes called "a slow pessi" or "a slow fmm." Usually used for very small momentums
Burst 0t (burst jam, adv jam)	Hold Sneak and W, release Sneak and press Jump on the same tick.
Burst 1t (burst hh, adv hh)	Hold Sneak and W, release Sneak, and press Jump one tick later.
Force momentum (fmm)	A broad term for a general type of strategy used on momentums similar in length to 1bm. Usually starts